Analyzer BAS-100 TS
The BAS-100 TS is open to being used with all brands of biochemistry reagents.
Single chip machine, WindowsCE operating system, does not require Windows XP or Windows 7.
Optics: 7 filters, 340, 405, 450, 505, 546, 578, 630. Thermostatic Control: Flow Cell Temperature: 37C Peltier Elements. Flow through cell: 32ul Suction Pump System Display:7.0 inch TFT Color touch screen Precision: +-0.2C Continuous Memory: 200 assay program,200000 results Printer: Built-in thermal printer, 57mm. wide paper Power Supply: AC85-260; 50Hz or 60Hz Sample blood serum Volume: Reagent plus sample serum 500 ul Reagent will give ratio The suction volume is 500 ul Halogen lifetime is 1500 hours Calibration is leaner Photometric resolution is 0.0002A
- Photometric scanning of Spectrum, Analysis in multiple longitude of wave and kinetics, endpoint, fixed time, kinetic. Blank of water or blank of reagent method can be linear or nonlinear, according to the type of reagent you are using.
- Diagnosis of Operation
- Automatic Calibration
- System of aspiration of sample (Pale of flow, Aspiration System, Faslk of Residuals, Tubes, Connectors, Etc)
- Power Cable Included
- Works with WindowsCE operating system. Single chip machine, does not require Windows XP or Windows 7.
- Enzyme Kinetic GPT GOT tests.
Atomic Absorption Spectrophotometer
Atomic Absorption Spectrophotometer (Fully Automatic Flame System)
Clinical Biochemistry Touch Screen Analyzer with Temperature Control and Internal Printer BAS-120TS
Clinical Biochemistry Touch Screen Analyzer with Temperature Control and Internal Printer BAS-120TS is a TOUCH SCREEN Microprocessor Biochemical Analyzer, which measures over 50 biological indicators.
The BAS-120TS is open to being used with all brands of biochemistry reagents.
THIS BIOCHEMISTRY ANALYZER CAN TEST SAMPLES IN TWO WAYS, BY SUCTION PUMP AND BY DISPOSABLE CUVETTE
Features:
- Powerful Software
- 7.0" Touch Screen
- Multi-language
- Built-in Printer
- USB port for external printer, online operation, keyboard,software update (optional)
- Very easy to use, user-friendly interface
- 50 Biochemistry tests
- Sample blood serum
- Volume: Reagent plus sample serum 500 ul
- Reagent will give ratio
- The suction volume is 500 ul
- Halogen lifetime is 1500 hours
- Calibration is leaner
- Photometric resolution is 0.0002A
Reading Cuvette | Both flow through cell and direct reading cuvette |
Measuring Volume | 500ul |
Incubator | 20 incubating positions |
Photometric System | Light source: 6V/10W halogen lamp Wavelength: 340/405/492/510/546/578/620nm , 2 more filters upon request Wavelength accuracy: ±2nm |
Thermostatic Control | Temperature: 25 °C,30 °C, 37 °C Precision: ±0 °C |
Measuring System | Method: End point, Fixed time,Multistandards,Differential, Bichromatic, Immunoturbidimetric,etc. Measuring Range: 0-3.000 O.D Photometric Linearity: ± 2% (0-3.000 O.D) Photometric Accuracy: ±1% (0-3.000 O.D) Carry-over: ≤1% |
Drift | <0.005 0.D/hr |
Test Menu | Chemistry: T.B LI r-GT/GGT CHO Ca APOB-1/B CHE D.B LI ALP/AKP TG CL APOB CREA TP UREA CK P CK-MB Mg ALB LOH C ASO AFU Lactic Acid ALT/GPT UA a-HBDH C02 FMN LP(a) AST/GOT GLU AMY LDL-C HDL-C |
Quality Control | Excellent Q.C function, Q.C chart may be displayed and printed |
Display | 7 inch touch screen |
Storage | Over 200 programs, 1000 test results |
Printer | Built-in thermal printer |
LIS Software | Optional |
Interface | USB port for external printer, keyboard,software update (optional) |
Power Supply | AC 110V/60Hz or 220V/50 Hz |
Dimensions | 34cm x 38cmx 18cm |
Weight | 8.0Kg |
Clinical Microplate Reader EMR-500 Touch Screen
Clinical Microplate Reader EMR-500 Touch Screen has eight channel photometers for the sequential and simultaneous for the sequential and simultaneous reading of microplates. Providing the best level of sensitivity for variable assay conditions, with powerful software are able to perform reading and data procession with relative memorization.
Features:
One of the important advantages of this instrument is that it is open to working with any proper reagent and with many applications.
- Eight channel photometers for the sequential and simultaneous for the reading of microplates.
- Providing the best level of sensitivity for variable assay conditions, with powerful software are able to perform reading and data procession with relative memorization.
- Ability to read flat, U and V bottom.
- Auto calibration before each reading.
- Programmable variable speed shaking.
- Measurement range: 0.000-3.500A
- Light Source: Halogen
- EMR-500 can work by itself, and can connect to the computer. Can use with Windows XP and Windows 7.
|
Combined Clinical Chemistry and Coagulation Multitest Analyzer Touch Screen BAS-150 TS PLUS
THIS BIOCHEMISTRY ANALYZER CAN TEST SAMPLES IN TWO WAYS, BY SUCTION PUMP AND BY DISPOSABLE CUVETTE
Features:- Latest concept and technology
- Flow through cell, micro and macro cuvette available
- Lower energy consuming technique
- Color touch screen
- Multi-language, and more
- Coagulation Testing
- 7.0" True Color Touch Screen (800 x 480 pixels)
- Inside multi-function incubator
- Universal power supply
- Enzyme Kinetic GPT GOT tests
- Sample blood serum
- Volume: Reagent plus sample serum 500 ul
- Reagent will give ratio
- The suction volume is 500 ul
- Halogen lifetime is 1500 hours
- Calibration is leaner
- Photometric resolution is 0.0002A
Function: | Chemistry + Coagulation |
Analysis method: |
Photometry: End point, fixed time, kinetic, serum blank, Bi-chromatic, double-reagent, multi-point Coagulation: Nephelometry |
Wavelength: | Chemistry: 340, 405, 492, 510, 546, 620, 670nm. Other available on request. Coagulation: 450, 670nm. Others on request. |
Cuvette: | Flow through cell, direct reading, and coagulation cuvette available |
Sample Volume: | 50-500 ul |
Incubator: | 2 reagent and 20 sample incubation positions, controlled at 37±0.1°C |
Temp. for cuvette | 37±0.1°C |
Drift | ≤0.0001 OD/hr |
Quality Control: | Quality control for normal and abnormal value, automatic statistics, and analysis of control data |
Display: | 7 inch, color touch screen |
Storage: | 1,000 test results |
Printer: | Built-in thermal printer |
Interface: |
USB & RS-232 |
Languages: | English, Spanish, French, Russian, Portuguese, Chinese, Others available on request. |
Power: | 110V/60Hz, or 220V/50Hz 150W |
Dimensions: | 340mm x 380mm x 210mm |
Weight: | 6.5 kg |
Test Menu: | Chemistry: Kidney function, liver function, cardiac markers, minerals, blood disorders, blood lipids, drug of abuse, miscellaneous, etc. Coagulation: PT, APTT, FBG, TT, D-Dimer, FDP, AT-III, PC, PS, VWF, Factor V, VII, VIII, IX, X, XI, XII, deficient substrate, etc. |
DW-20 De-Ionized Water Distiller with Gauge
Water Processing Volume: | 20L/hour |
Installation requires: | |
a) Water Conductivity: | <400us/cm |
b) Water Pressure: | 0.1-0.4 Mpa (if no need extra pump) |
c) Water Temperature: | 5°C-45°C |
Water Speed of Output: | 1.5-2L/min |
After Purification Conductivity: | >16 Ion< 0.1ppb |
Power: | 50W |
Dimensions: | 420mm x 350mm x 500mm |
Weight: | 25-30 kg |
GC-4500 Gas Chromatography System
5 kinds of sample injectors and all conventional detectors can be attachable depending on samples for analysis. In particular, for analysis of environmental samples (water quality, air, soil and wastes) satisfactory outcome can be achieved by connecting a sample preparation system such as the Purge & Trap.
Features:
- Automatic flow control and ignition of the FID- flame
- Auto-start of chromatogram when sample is injected
- Gas save function (Capillary Injector)
- TCD maximum current control based on the type of gas
- Optional valves (solenoid, 2-position) control function
- Automatic notification of power-off
GC-46 Gas Chromatography (UNDER IMPROVEMENT)
GC-46 Electronic pressure flow monitoring gas chromatography
GC-46 gas chromatography is a new generation of gas chromatograph with high stability and reliability, which is suitable for routine testing. It is equipped with advanced electronic pressure and flow measurement monitoring EPFM module, by adjusting gas circuit knob, can get gas parameters easily in the host screen and workstation, including the pressure and flow of carrier gas, hydrogen, air etc, and the injection port diversion ratio, column flow, etc. No flow meter measurement and manual calculation required, easy to operate.
GC-46 gas chromatography is widely used in petrochemical, fine chemical, biological medicine, environmental protection, food hygiene, high purity gas, electricity, wine making, scientific research and education and other fields of analysis, is the best choice for daily detection.
The machine can be installed at most three injection ports and three detectors; Easy to install automatic liquid sampler and special custom valve system to achieve high throughput analysis.GC-46 series networked gas chromatography can be equipped with 6‐bit, 15‐bit and 150‐bit liquid automatic sampler, and each parameter can be controlled by counter‐control software, which will bring better repeatability and improve work efficiency, while eliminating errors caused by manual injection.
HPLC-4 Complete Manual Injection Isocratic System High Performance Liquid Chromatography
HPLC-4 Complete Manual Injection Isocratic System High Performance Liquid Chromatography
The HPLC-4 Complete Manual Injection Isocratic System offers power data processing with unquestionable accuracy and precision.
The HPLC-4 Chromatography system gives excellent reliability and stability with accurate flow rate. Comes with easy to use LCW software offers complete control, powerful data processing, reporting functions, intelligent diagnostic systems and maintenance utility ensure a complete and flexible software solution for your analytical work.
Features:
- “Accuracy is the spirit of analysis.” Based on a well structured design and manufacturing process, unquestionable accuracy and precision were a prerequisite, secondly quantification and precision of analysis were dependent on accurate flow rate.
- Excellent reliability and stability. The pump heads have been machined using a first class CNC process; the innovative structural design has been designed to achieve minimum pressure fluctuation. Consequently stable flow, low noise and overall quality provide the foundation for reliable results.
- LCW software offers complete control, powerful data processing, reporting functions, intelligent diagnostic systems and maintenance utility ensure a complete and flexible software solution for your analytical work.
- Art combined with practicality. The modular system provides shape and character whilst being aesthetically pleasing. The unique and practical design ensures ease of use and maintenance. In essence, the combination of art and practicality complement each other.
- The HPLC-6 is a high performance yet cost effective solution. The modular design ensures that you can configure the system to meet your application requirements. A dedicated team of product specialist will provide technical support and provide an application development service.
HPLC-6 Complete Manual Injection Gradient System High Performance Liquid Chromatography
HPLC-6 Complete Manual Injection Gradient System High Performance Liquid Chromatography
The HPLC-6 Complete Manual Injection Gradient System offers power data processing with unquestionable accuracy and precision.
The HPLC-6 Chromatography system gives excellent reliability and stability with accurate flow rate. Comes with easy to use LCW software offers complete control, powerful data processing, reporting functions, intelligent diagnostic systems and maintenance utility ensure a complete and flexible software solution for your analytical work.
Features:
- “Accuracy is the spirit of analysis.” Based on a well structured design and manufacturing process, unquestionable accuracy and precision were a prerequisite, secondly quantification and precision of analysis were dependent on accurate flow rate.
- Excellent reliability and stability. The pump heads have been machined using a first class CNC process; the innovative structural design has been designed to achieve minimum pressure fluctuation. Consequently stable flow, low noise and overall quality provide the foundation for reliable results.
- LCW software offers complete control, powerful data processing, reporting functions, intelligent diagnostic systems and maintenance utility ensure a complete and flexible software solution for your analytical work.
- Art combined with practicality. The modular system provides shape and character whilst being aesthetically pleasing. The unique and practical design ensures ease of use and maintenance. In essence, the combination of art and practicality complement each other.
- The HPLC-6 is a high performance yet cost effective solution. The modular design ensures that you can configure the system to meet your application requirements. A dedicated team of product specialist will provide technical support and provide an application development service.
LB-205 Binocular Digital Microscope with Seidentopf Binocular Head, Wide Field Eyepiece, Backward Quadruple Nosepiece, Achromatic Objectives, LED Illumination and 3.2MP Camera and Software
LB-205 Binocular Digital Microscope with Seidentopf Binocular Head, Wide Field Eyepiece, Backward Quadruple Nosepiece, Achromatic Objectives, LED Illumination and 3.2MP Camera and Software comes with a 3.2 MP color image sensor and is economical, practical and easy to operate. It is widely used in educational, academic, agricultural and study field. It is connected to a computer via a USB cable. The software is powerful and easy to operate, it can view images at real time, take photos and videos and measurement without touch.
Features
-
- Built-in 3.2 Mega Pixel CMOS camera, vivid images and real color reproduction.
- High definition images and videos, high frame rate.
- Professional image analyze software supports Windows Vista / Win 7 / Win8 / Mac Operation Systems. The software can preview, take photos and video, do image processing and measurement.
- Support Multi-language (Arabic, Chinese, English, French, Germen, Japanese, Polish and etc.).
- Compact and flexible, ideally suited for desktop, laboratory worktable.
Viewing Head Seidentopf Binocular Head, Inclined at 30°, Interpupilary Distance 48-75mm Camera System Resolution 2048×1536 (3.2Mega Pixel) Output Mode USB2.0 Operation System Window 2000/ XP/ Vista/ Win 7/ Win8/ Mac Software ScopeImage 9.0 Frame Rate 9 fps @ 2048×1536 Eyepiece WF10×/ 18 P16×/ 12 Nosepiece Backward Quadruple Nosepiece Objective Achromatic Objective 4×, 10×, 40×, 100× Stage Double Layers Mechanical Stage 132×142mm/ 75×40mm Condenser Abbe NA1.25 with Iris Diaphragm & Fliter Focusing Coaxial Coarse & Fine Adjustment, Fine Division 0.002mm, Coarse Stroke 37.7mm per Rotation, Fine Stroke 0.2mm per Rotation, Moving Range 20mm Illumination 3W LED illumination, Brightness Adjustable Halogen Lamp 6V/ 20W, Brightness Adjustable (optional) Kohler illumination (optional) Optional accessories Phase Contrast Kit (optional) Dark-Field Attachment (optional) Polarization Attachment (optional) Rechargeable battery (optional)